Navbea Card X

Navbea Name Badge N2 is an RFID beacon tag with 3-axis accelerometer sensor that can advertise iBeacon, Eddystone and Sensor data.

Employee attendance, access control, identification, location tracking, etc. It has a compact and thin structure design, the right hardware and robust firmware, which can be used for remote cloud data management.

Each Badge N2 beacon will continue to send Bluetooth broadcasts with different IDs or MAC addresses. With the bluetooth signal sent to the Gateway, it scans the relevant broadcast data to determine that the person has entered the area and the monitored person is in the location. You can see which IDs have entered the venue before.

Badge N2 pointer is equipped with an acceleration sensor (Accelerometer LIS3DH) that can be adjusted by preset conditions: APP settings. When setting it to rest for ten minutes, the H5 will automatically go into sleep mode. If you let it set without moving, it will automatically go into sleep mode after reaching a preset time. While on the move, the beacon will automatically start broadcasting again.

Category

DESCRIPTION

  • Bluetooth® 5.0 chipset nRF52 series
  • wearable design
  • Panic button
  • Accoremeter Included
  • RFID (NFC) option
  • Waterproof IP67
  • Battery Lifetime: 2 Years
  • Battery replaceable: Yes
  • 6 Slots configurable
  • Support button trigger and motion trigger
  • Firmware updated via DFU
  • Supports RFID NXP MIFARE Plus EV1 2k 7b
  • RFID frequency 13.56MHZ, mobile phone detection distance 5mm, card reader detection distance 40mm
  • G-value, sampling rate and sensitivity of the 3-axis accelerometer sensor are configurable
  • Customizable logo (MOQ 100 units)
  • Supplied with your own configuration (MOQ 100 units)
Parameters
Size (H*W*L) 65,38 42,98 mm × mm × mm 5,7
Battery Model CR3032
Battery Capacity (mAh) 500 mAh
Default battery Life up to 2 years
Battery is replaceable Yes
Maximum range 120m (+4dBm with RFID distance up to 80m)
Waterproof Yes IP67
Meeting minutes iBeacon & Eddystone: UID, URL, TLM Eddystone Configuration GATT Service
Firmware update OTA
Insertion method Can be worn with lanyard or keychain
Internal Sensor accelerometer sensor
RFID 13.56MHz RFID / 125KHz and 868~915MHz can be customized
certification CE and FCC

 

Other products

Read more

Navbea Long Range

The Navbea Long Range Beacon is a useful long range beacon with a range of almost 300m. But the range depends on the working environments. Navbea Long Range belongs to the ultra low power ARM® chipset NORDIC® nRF52 series. Its dimensions are 58 x 36 mm and its thickness is approximately 25 mm.

This product contains a battery that can last up to 8 years. Like its range, battery life is dependent on the operating environment. (Calculated based on default battery duration, broadcast Interval 1 second and TX power 0 dBm.)

Read more

Navbea Gateway Indoor-Outdoor

Navbea Gateway is a Bluetooth 5.0 low energy (BLE) 3G / 4G cellular / Wi-Fi / Ethernet connectivity gateway without using a smartphone or app. Navbea Gateway collects data from iBeacon, Eddystone, BLE sensor and other BLE devices and uploads it to local or remote cloud server via MQTT/HTTPS protocol over 3G/4G, ethernet, Wi-Fi or WiFI mesh.

User can easily configure Navbea gateway via user interface and it supports remote configuration.

Read more

Navbea Road Sensor

i11 Road Stud Beacon uses BLE5.0 technology, supports multiple iBeacon and Eddystone protocols (UID, URL, TLM) simultaneously.

It has strong waterproof IP68 rating, shockproof IK08, dustproof and explosion-proof rugged housing. It can be fixed to the ground or objects with screws for locating and tracking. By cutting the external wire, the lantern is very easy to operate and is widely used in large supermarkets, construction site, factories, parking lots, etc. It can be used in both indoor and outdoor harsh environments.

Read more

Navbea Light Control

The light sensor beacon S2 uses the latest and greatest technology Bluetooth® 52 hardware platform, based on the Nordic nRF5.0 series chipset. It can detect whether there is ambient light. It is designed for commercial advertising, indoor location-based service and is specialized for asset management and tracking applications.

Moreover, if standard iBeacon firmware is required, the S2 Light sensor can run smoothly on beacon hardware.