Navbea Gateway Indoor LED

Category Tags ,

DESCRIPTION

BLE & WiFi/ETH Gateway

Gateway 02 is a Bluetooth 5.0 low energy (BLE) Wi-Fi / Ethernet connectivity gateway that works without a smartphone or apps. Gateway 02 collects data from iBeacon, Eddystone, BLE sensor and other BLE devices, and then sends it to local server or remote cloud server via MQTT/MQTT over SSL/TLS/HTTP/HTTPS protocol over Wi-Fi. It is possible to configure the Gateway 02 gateway via a very simple web user interface. It also supports batch configuration.

DESCRIPTION

General: 

● Data is saved in TF Data Card or Udisk.
● AWS / Azure / ARM mBed Iot Cloud Support
● DC 5.0V, 1A, Micro-USB Input
● Firmware Upgraded by OTA
● HTTP (SSL / TLS) / MQTT (SSL / TLS) support & Proxy) / TCP
● Operating Temperature: -25 ℃ to 65 ℃
● Batch Configuration Tool Available

 

WIFI and Ethernet: 
● WPA 2.0 Enterprise Encryption ； 802.1x authentication
● CPU 575MHz 32-bit Application Processor
● 300Mbps PHY data rate, 802.11b/g/n WiFi
● 2 USB 2.0 Host Connectors and 1 TF Card Slot
● 128 Mbytes of 16-bit DDR2 RAM
● 16 Mbyte SPI NOR Flash
● RGB LED Strip as Status Indicator
● OpenWrt for Embedded Devices, Linux Distribution
● Support for WiFi failover and Multiple Top Level AP Configurations
● 802.3/10 Ethernet with 100af PoE

 

Bluetooth Low Energy: 
● 64MHz 32-bit Processor
● Internal Power Amplifier Chip to Precisely Scan BLE
● At least Bluetooth 4.0 (For BLE only)

Parameters

general information

 

 Color  White
 Dimension  150x150x36mm
 Net weight  180 g
 Accesories  1x USB cable, mental fixation and screws
 power supply (Vcc)  DC 5.0 (+/- 5%) Max. 5,5 Volts
 Storage temperature  -40℃ to 85℃
 Gender  Max 95%, Non-condensing, relative humidity

 

BLE RF Performance

 

 Wireless  IEEE 802.11b/g/n (single stream)
 data rate  IEEE 802.11b, 1-11Mbps IEEE 802.11g, 6-54Mbps IEEE 802.11n (2.4GHz), 7.2-72.2Mbps
 frequency band  2.400 – 2.484 GHz
 Number of selectable Subchannels  14 channel
 Max input input level  – 10dBm (with PER < 11% at 8 Mbps) – 20dBm (at 54 Mbps with PER < 10% ) – 20dBm (with PER < 7% on MCS10)
 Minimum entry level  – 87dBm (typical, with PER <8% @ 11 Mbps) – 70dBm (at 54 Mbps PER < 10% typical ) – 70dBm (typical with PER < 7% on MCS10)
 Transmit Power  17dBm (typical) @ 802.11b 11.3dBm (typical) @ 802.11g 8.2dBm (typical) @ 802.11n
 Aralık  up to 90 meters (in open area)

 

BLE RF Performance

 

Element  Parameters
 RF Power Accuracy  +/- 4 dB
 Receiver Sensitivity  -108 dBm @ 250kbps, 0.1% BER -93 dBm @ 1Mbps, 0.1% BER
 Maximum Received Signal Strength at PER <0,1%  0 dBm
 Frequency Deviation  +/- 250kHz @BLE
 Scanning and processing simultaneously  300 BLE packets per second
 Aralık  up to 300 meters in open area

Other products

Read more

Navbea Long Range

The Navbea Long Range Beacon is a useful long range beacon with a range of almost 300m. But the range depends on the working environments. Navbea Long Range belongs to the ultra low power ARM® chipset NORDIC® nRF52 series. Its dimensions are 58 x 36 mm and its thickness is approximately 25 mm.

This product contains a battery that can last up to 8 years. Like its range, battery life is dependent on the operating environment. (Calculated based on default battery duration, broadcast Interval 1 second and TX power 0 dBm.)

Read more

Navbea Gateway Indoor-Outdoor

Navbea Gateway is a Bluetooth 5.0 low energy (BLE) 3G / 4G cellular / Wi-Fi / Ethernet connectivity gateway without using a smartphone or app. Navbea Gateway collects data from iBeacon, Eddystone, BLE sensor and other BLE devices and uploads it to local or remote cloud server via MQTT/HTTPS protocol over 3G/4G, ethernet, Wi-Fi or WiFI mesh.

User can easily configure Navbea gateway via user interface and it supports remote configuration.

Read more

Navbea Road Sensor

i11 Road Stud Beacon uses BLE5.0 technology, supports multiple iBeacon and Eddystone protocols (UID, URL, TLM) simultaneously.

It has strong waterproof IP68 rating, shockproof IK08, dustproof and explosion-proof rugged housing. It can be fixed to the ground or objects with screws for locating and tracking. By cutting the external wire, the lantern is very easy to operate and is widely used in large supermarkets, construction site, factories, parking lots, etc. It can be used in both indoor and outdoor harsh environments.

Read more

Navbea Light Control

The light sensor beacon S2 uses the latest and greatest technology Bluetooth® 52 hardware platform, based on the Nordic nRF5.0 series chipset. It can detect whether there is ambient light. It is designed for commercial advertising, indoor location-based service and is specialized for asset management and tracking applications.

Moreover, if standard iBeacon firmware is required, the S2 Light sensor can run smoothly on beacon hardware.